Rear End Components

  • QuickChange Gear Case QuickChange Gear Case

    QuickChange Gear Case

    QuickChange Gear Carrying Tote Black Plastic Labeled so you can fill in your custom gear set Will NOT work for 6 Spline gears Bryke Racing Part #: 404-010
    $7.95
    Add to Cart
  • Quick Change Gear Storage Case Quick Change Gear Storage Case

    Quick Change Gear Storage Case

    Quick Change Gear Storage Case 8 - Section Carrying Case allows for 8 Sets of Gears Light-Weight, Compact Case 5" x 8" x 15-1/2" overall when closed Will NOT work for 6 Spine gears Bryke Racing Part# 420-000
    MSRP: $49.99
    $49.95
    Add to Cart
  • Quick Change Drain Pan

    Quick Change Drain Pan

    Quick Change Drain Pan Perfect for changing gears in your rear end Built in Drip Tray reduces the mess during your gear change Welded on handle makes positioning the pan a simple task Bryke Racing Part #: 420-020
    $49.95
    Add to Cart
  • Quick Change Cover Nuts Package of 10

    Quick Change Cover Nuts Package of 10

    Quick Change Cover Nuts Lightweight aluminum nuts are pre-drilled for safety wire Using safety wire prevents nuts from working loose and causing leaks Nuts have 3/8"-16 threads Package of 10
    $38.95
    Add to Cart
  • Quick Change Nut and Bolt Pair Quick Change Nut and Bolt Pair

    Quick Change Nut and Bolt Pair

    Quick Change Nut and Stud Set Broke a stud, no problem with this easy repair kit Includes (2) Studs and (2) QuickChange Nuts Bryke Racing Part #: 404-100k
    $10.95
    Add to Cart
  • Ford 9 inch Installation Kit Ford 9 inch Installation Kit

    Ford 9 inch Installation Kit

    9" Ford Installation Kit Complete Ring and Pinion Installation Kit: Pilot Bearing Pinion Pilot Pinion Seal Pinion Nut Shims Crush Collar Ring Gear Bolts O-Ring Gear Gasket Sealant Gear Marking Grease Brush and Loctite Carrier Bearings not included Bryke...
    $59.95
  • Rear End Tank Resevoir

    Rear End Tank Resevoir

    Rear End Filler Tank Aluminum 7-1/2" Tall X 3" Diameter -10AN Outlet Fitting 8-1/2" Diameter Mounting Flange 24oz Capacity Bryke Racing Part #: 404-140
    $31.95
  • Drive Flange 5x5 Steel

    Drive Flange 5x5 Steel

    GM Drive Flange Kit Steel Drive Flange for GM Hub w/ Dust Cover O-Rings 2 Tapered Screws 3 Allen Head Screws Bryke Racing Part #: GNDFK5x5
    $59.95
    Add to Cart
  • Remote Fill Tank Quick Change Fitting

    Remote Fill Tank Quick Change Fitting

    Side Bell Inspection Plug Replaces the side bell inspection plug on quick change. Use this fitting to connect a rear-end filler for easy and mess free filling and inspection. -20 AN Port to -10 AN hose fitting. Made from lightweight aluminum. Anodized...
    $22.95
    Add to Cart
  • Reservoir Line Kit

    Reservoir Line Kit

    Power Steering Reservoir Line Kit Kit Includes: 4' Black 5/8" Hose (1) -10an to 10AN Female 90 Degree (1) #10 to 5/8” Lock Hose Straight Bryke Racing Part #: 404-155
    MSRP: $45.00
    $44.95
    Add to Cart
  • 1 Row 2-Link Suspension Cages

    1 Row 2-Link Suspension Cages

    2-Link 1 Row Suspension Cage 9 Trailing arm locations from 3" - 6-1/4" from centerline to axle Shock can be on front or back side of shock plate 4-1/2" -6-1/2" drop from centerline of axle Bryke Racing Part#: HMS301
    $185.95
    Choose Options
  • 2 Row 2-Link Suspension Cages

    2 Row 2-Link Suspension Cages

    2-Link 2 Row Suspension Cage 7 Trailing arm locations from 2" - 4-1/2" from centerline to axle Shock can be on front or back side of shock plate 4-1/2" -6-1/2" drop from centerline of axle Bryke Racing Part#: HMS302
    MSRP: $219.95
    $215.95
    Choose Options
  • Clamp On Lower Link Mount

    Clamp On Lower Link Mount

    Clamp-on Lower Link Mount Mounts Shock, slider and Trailing arms to one single mount 6 inches from center of shock mount to center of axle tube 1/2" holes on the front and back 3/4" Hole for link Great choice for converting 4 links to B-mods and souther...
    MSRP: $59.99
    $59.95
    Add to Cart
  • Clamp On Coil Over Bracket

    Clamp On Coil Over Bracket

    Clamp-on Coil Over Bracket Fits 3" Axle Tube 7" From Center of Mount Hole to Center of Axle tube Hole Bryke Racing Part #: 330-010
    MSRP: $59.99
    $44.95
    Add to Cart
  • Spring Seat

    Spring Seat

    Spring Perch Seat Welds to 3" rear end housing Works with 5" springs Overall length: 7" Height: 3-1/2" Bryke Racing Part# 320-335
    $12.95
    Add to Cart
  • Spring Seat Off-set Spring Seat Off-set

    Spring Seat Off-set

    Spring Perch Seat Offset Welds to 3" rear end housing Works with 5" springs Overall Length: 7" Height: 3-1/2" This is for one spring mount
    MSRP: $14.99
    $14.95
  • Spring Cup

    Spring Cup

    Spring Cup Fits both 5" or 5-1/2 Springs Overall length: 3-1/4" Length from top of plate to bottom of weight jack bolt 3" Bryke Racing Part #320-320
    $11.95
    Add to Cart
  • Weight Jack Cup Lightweight Weight Jack Cup Lightweight

    Weight Jack Cup Lightweight

    Weight Jack Cup Lightweight Save .75lb per cup over traditional weight jack cups For 1" Jack Bolts Dimensions: 5" across flange, 3" across bottom, 2-1/8" flange lip Bryke Racing Part# 320-321
    MSRP: $12.99
    $12.95
    Add to Cart
  • Swiveler Weight Jack

    Swiveler Weight Jack

    Swiveler Weight Jack Standard 1" Course bolt Will fit on 5" and 5-1/2" springs Allows cup in top of spring to pivot on bolt eliminating bind during travel. Bryke Racing Part# 320-322
    MSRP: $34.99
    $34.95
    Add to Cart
  • Horizontal Weight Jack Mount

    Horizontal Weight Jack Mount

    Clamps on 1-1/2" tubing. Easily install weight jack boss where its needed. Accepts standard 1" coarse weight jack bolt. Bryke Part#: 320-329
    $21.95
    Add to Cart
  • Spring Spacer Adjustable Spring Spacer Adjustable

    Spring Spacer Adjustable

    Adjustable Spring Spacer Adjusts up to 3" Overall height: 2-1/2" Works on front or back springs on both 5" or 5-1/2" springs Includes one spring Bryke Racing Part# 320-301
    $34.95
    Add to Cart
  • Spring Spacer Adjustable to 3" Spring Spacer Adjustable to 3"

    Spring Spacer Adjustable to 3"

    Adjustable Spring Spacer Adjusts up to 3" Works on front or back springs on both 5" or 5-1/2" springs Includes one spring spacer Bryke Racing Part# 320-302
    $37.95
    Add to Cart
  • Spring Spacer Adjustable to 5" Spring Spacer Adjustable to 5"

    Spring Spacer Adjustable to 5"

    Adjustable Spring Spacer Adjusts up to 5" Extra adjustment- works great on Limited Modifieds Includes one spring spacer Bryke Racing Part# 320-304
    MSRP: $34.99
    $34.95
    Add to Cart
  • Spindle Nut Kit 2" Steel

    Spindle Nut Kit 2" Steel

      Spindle Nut Kit Kit Includes: Spindle Nut  Keyed Washer 2 Screws 2" Pin 1-13/16"-16 RH Threads Steel For Wide 5 and 5x5 hubs Fits Allstar, Howe, PCR 5x5, and most wide 5 hubs Bryke Racing Part #: 400-025  
    $15.95
    Add to Cart
  • Spindle Nut Kit 2" Aluminum

    Spindle Nut Kit 2" Aluminum

      Spindle Nut Kit Kit Includes: Spindle Nut Keyed Washer 2 Screws 2" Pin 1-13/16"-16 RH Threads Aluminum For Wide 5 and 5x5 hubs Fits Allstar, Howe, PCR 5x5, and most wide 5 hubs Bryke Racing Part #: 400-026  
    $14.95
    Add to Cart
  • Spindle Nut Kit 2.5" Steel

    Spindle Nut Kit 2.5" Steel

      Spindle Nut Kit Kit Includes: Spindle Nut Keyed Washer 2 Screws 2.5" Pin Thread: 2-3/8"-18 Steel Available in both Right Hand & Left Hand threads For 5x5 hubs Fits AFCO, Winters, and SCP 5x5 GN Bryke Racing Part #: 400-03  
    $23.95
    Choose Options
  • Pinion Nut

    Pinion Nut

    Untitled Document Ford 9" Pinion Nut Coated to Lock Threads Won't Back Off  
    MSRP: $4.99
    $4.95
    Add to Cart
  • Metric Caliper Bracket

    Metric Caliper Bracket

    Metric Caliper Bracket Weld On Fits small GM Metric Calipers Example: '85 Monte Carlo 7/16 Fine Thread Fits 3" Axle Tube 5-1/2" Bolt Spacing Bryke Racing Part# 221-000
    MSRP: $9.99
    $9.95
    Add to Cart
  • U-Bolt kit for 1350 u joints

    U-Bolt kit for 1350 u joints

    U-Bolt kit Fits 1350 U-Joints U-Joint measure 3-5/8" across with 1-3/16" caps Used to secure driveshaft to the pinion yoke. Includes lock washers and nuts Bryke Racing Part# 703-011
    $7.95
    Add to Cart
  • U Bolt kit for 1310 U Joints

    U Bolt kit for 1310 U Joints

    U-Bolt kit Fits 1310 U-Joints U-Joint measure 3-1/4" across with 1-1/16" caps Used to secure driveshaft to the pinion yoke. Includes lock washers and nuts Bryke Racing Part# 703-010
    $6.95
    Add to Cart
  • Mini Breather

    Mini Breather

    5/8" Mini Breather Filter Perfect for vent of fuel cells and/or rear ends Attached with supplied radiator hose clamp Washable Outside Diameter 1-1/2" Length: 1" not including clamp area ID of hole: 5/8" Brand New & Unused Bryke Racing Part# 700-150 ...
    $12.95
    Add to Cart
  • Clamp on Breather Mount

    Clamp on Breather Mount

      Clamp on Breather Mount Kit Includes Breather and Clamp Clamps to 1-1/2" Tubing Bottom side is threaded 1/4" NPT Bottom side's OD is 5/8" Breather is 1" Tall x 1-3/8" in diameter Aluminum Black Perfect for venting Rear ends, Transmissions, Fuel...
    $32.95
    Add to Cart