Control Arms and Bushings

  • Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint

    Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint

    Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower...
    $164.95
    Add to Cart
  • Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint

    Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint

    Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower...
    $164.95
    Add to Cart
  • Chevelle RH Lower Control Arm KIT Chevelle RH Lower Control Arm KIT

    Chevelle RH Lower Control Arm KIT

    Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded K727 Screw in ball joint adapter installed and welded Reinforced front section to help keep control arm from bending Shock mount is included but will...
    $199.95
  • Chevelle LH Lower Control Arm KIT Chevelle LH Lower Control Arm KIT

    Chevelle LH Lower Control Arm KIT

    Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded K727 Screw in ball joint adapter installed and welded Reinforced front section to help keep control arm from bending Shock mount is included but will need...
    $199.95
    Add to Cart
  • Metric Upper Control Arm Small BJ RH

    Metric Upper Control Arm Small BJ RH

    Upper Control Arm RH GM Metric Offset 1-1/4" 6-7/8" Bolt Spacing on Cross Shaft Bolt-In Steel Powder Coated Gloss Black Fits Small Ball Joints Bryke Racing Part #: KEY 100-06-0xxxRHS-1
    $89.95
    Choose Options
  • Metric Upper Control Arm Small BJ LH

    Metric Upper Control Arm Small BJ LH

    Upper Control Arm LH GM Metric Offset 1-1/4" 6-7/8" Bolt Spacing on Cross Shaft Bolt-In Steel Powder Coated Gloss Black Fits Small Ball Joints Bryke Racing Part #: KEY 100-06-0xxxLHS-1
    $89.95
    Choose Options
  • Metric Lower Control Arm Bushing

    Metric Lower Control Arm Bushing

    Metric Lower Control Arm Bushing Fits GM A-Body, F-Body and G-Body 1978-1992 Steel Bushing Replaces Stock Rubber Bushings Bryke Racing Part #: ALL 56236
    $17.95
    Add to Cart
  • Upper Control Arm GM Metric

    Upper Control Arm GM Metric

    Upper Control Arm Mounting Bolt Pattern: 6-7/8" Ball Joint Spacing: 8" RH Side Ball Joint Spacing: 8.5" LH Side Ball Joint Style: Small Bolt-In Tubular - Steel Steel Cross Shaft Fits GM Metric and bolts to your stock mount Use Ball joints...
    $39.95
    Choose Options
  • Chevelle Lower Control Arm Bushings

    Chevelle Lower Control Arm Bushings

    Lower Control Arm Bushings Steel ID: .500 in. Frees up front suspension Direct replacement of the stock rubber bushings Inner sleeve allows bolt to be tightened without crushing or binding Fits 68 - 72 Chevelle Lower Control...
    $14.95 - $16.95
    Choose Options
  • Ball Joint Holder Small K772

    Ball Joint Holder Small K772

    Ball Joint Holder Small K772 Tall: 1.25in OD: 2.25in ID: 1.840in Moog Reference: K772 Fits: Bryke Racing Part# 320-122 Fits: QA1 1210-105, QA1 1210-201s, QA1 1210-238s Fits: HOWE 22300, 22330, 22335, 223310, 22320, 22330, 22335,...
    $13.95
    Add to Cart
  • Upper Ball Joint Holders

    Upper Ball Joint Holders

    Upper Ball joint holder. Centered Can be used on both the left and right hand side. Uses Standard Upper Screw- Ball Joint Bryke Racing Part# 320-203 Moog #K772 AFCO 20034LF 5/8" RH Male Thread 3/8" Hole, commonly used with a clevis
    $19.95
    Add to Cart
  • Small Ball Joint Pin Small Ball Joint Pin

    Small Ball Joint Pin

    Small Ball Joint Replacement pin Lengths include: Standard Length -1/2" shorter than standard +1/2" Longer than standard +1" Longer than Standard Bryke Racing Part# 320-107
    $29.95
    Choose Options
  • Small Ball Joint Assembly Small Ball Joint Assembly

    Small Ball Joint Assembly

    Small Ball Joint Upper Control Arm Assembly Ball joint housing Standard Length Ball Joint Pin Steel Cap Low Friction ball joint assembly Easily replace ball joint pin lengths or bent ball joint pins Provides a lot more clearance on your front...
    $88.95
    Choose Options
  • Upper Control Arm

    Upper Control Arm

    Adjustable upper control arm assembly Lightweight and fully adjustable Uses heims so there is nothing to bind up. Includes (2) Heims (4) Jam Nuts (1) Ball-Joint Holder (1) Clevis (1) 5" x 5/8 tube (1) 6" x 5/8 tube. If you require different size...
    $69.95
    Add to Cart
  • Clevis Clevis

    Clevis

    Clevis 5/8"-18 right hand threads 3/8" bore 3/8" slot Bryke Racing Part# 320-202
    $9.95
    Add to Cart
  • Screw in Ball Joint Adapter for Chevelle Lower

    Screw in Ball Joint Adapter for Chevelle Lower

      Screw In Ball Joint Adapter Ideal for modifying stock style Chevelle Lower Control Arms to accept a screw-in style ball joint Sleeve O.D.: 2.010" 1-1/4" Tall Fits Moog K772 style Screw-In Style Ball joints Note: Modifications to control arm may...
    $14.95
    Add to Cart
  • 5/8 Double Adjuster Linkage

    5/8 Double Adjuster Linkage

    5/8 Double Side Linkage Adjuster 5/8"-18 thread Double sided Available in Right Hand Female x Left Hand Male and Left Hand Female x Right Hand Male Material: Steel Black Bryke Racing Part #: WEHWM245
    $19.95
    Choose Options