Wehrs Steel Shock Mount 2-1/4 Drop 1-1/2 Tubing

Wehrs Shock Mount Bolt-On Steel Bolt-On 2-1/4" Drop Fits 1-1/2" Tubing Bryke Racing Part #: WEH WM221150s

Wehrs Steel Shock Mount 2-1/4 Drop 1-1/4 Tubing

Wehrs Shock Mount Bolt-On Steel Bolt-On 2-1/4" Drop Fits 1-1/4" Tubing Bryke Racing Part #: WEH WM2211250s

Hammond Motorsports 45 Degree Shock Block

45 Degree Shock Block Only Used for 4-Link Suspension Cages Bryke Racing Part #: HMS-34

Hammond Motorsports 45 Degree Shock Clevis

Replacement Shock Clevis for the 45 Degree Shock block For use with 4-Link Suspension Cages Bryke Racing Part #: HMS-34C2

Hammond Motorsports 45 Degree Shock Block - Complete

Complete 45 Degree Shock Block Kit includes: 45 Degree shock block 45 Degree shock Clevis Bryke Racing Part #: HMS34SB

Clamp On Lower Link Mount

Clamp-on Lower Link Mount Mounts Shock, slider and Trailing arms to one single mount 6 inches from center of shock mount to center of axle tube 1/2" holes on the front and back 3/4" Hole for link Great choice for converting 4 links to B-mods and souther...

Clamp On Coil Over Bracket

Clamp-on Coil Over Bracket Fits 3" Axle Tube 7" From Center of Mount Hole to Center of Axle tube Hole Bryke Racing Part #: 330-010

Spring Seat

Spring Perch Seat Welds to 3" rear end housing Works with 5" springs Overall length: 7" Height: 3-1/2" Bryke Racing Part# 320-335

Spring Seat Off-set

Spring Perch Seat Offset Welds to 3" rear end housing Works with 5" springs Overall Length: 7" Height: 3-1/2" This is for one spring mount

Jack Bolt Collar 1-1/8"

Jack Bolt Collar 1-1/8" Thread Steel Bryke Racing Part #: 320-323

Trick Tab

Trick Tab 1/8" Thick 3/8" Hole Conforms to round tubing for increased strength and easier welding Package of 10 Bryke Racing Part #: 303-107

Trick Tab 1/4" Hole 10 Pack

Trick Tab 1/8" Thick 1/4" Hole Conforms to round tubing for increased strength and easier welding Package of 10 Bryke Racing Part #: 303-106

Trick Tab Slotted

Slotted Body Tabs 1-3/4" x 1-1/2" x .130" Thick Slot 1/4" x 3/4" Steel 10 Pack Bryke Racing Part# 303-109-10

Body Tab

Body Tab Steel 0.085" thick 1/4" Hole 1-1/2" Tall Conforms to round tubing for increased strength and easier welding Package of 10

Radius Body Tabs

Body Tabs with radius Fits 1 1/2" Tubing, can be fitted for additional tubing sizes 5/8" From Center of Hole to Middle of Radius 1/4" Hole 1-3/8" Wide x 1-1/2" Tall .130" thick Flat 10 Pack Bryke Racing Part# 303-113-10

Chassis Radius Tabs 10 Pack

Chassis Trick Tabs 10 Pack Fits 1 1/2" Tubing 1-3/4" Wide 1-5/16" From center of hole to bottom of part 1/2" Hole Flat 10 Pack Bryke Racing Part #: 303-114

Flat Body Tabs

Flat Body Tabs 3/16" Hole 1-1/2" Long 1-1/2" Wide 15/16" From Center of hole to bottom of tab 10 Pack Bryke Racing Part #: 303-117

Roll Cage Slugs

Roll Cage Slug Frame Support Choice of 1-1/2" or 1-3/4" Diameter 1/8" Thick Use for end caps for roll cages, bumpers, round tubing Package of 20

Seat Belt Tabs

Seat Belt Tabs Use for mounting Seat Belts, Seats, Shocks, Chassis Parts, Etc. Dimensions - 1-1/2" Tall, 1" Wide - 2-1/4" Wide, 1/2" diameter hole Available in 3/16" & 1/4" thicknesses

Double Shear Seat Belt Tabs

Seat Belt Tab Double Shear for added strength 1/8" Steel 1/4" Gap 1/2" Holes 1 5/16" from bottom to center of holes 2 1/8" over all length Bryke Racing Part #: 303-200

Gussets

Steel Gussets Gives additional support Dimensions - 1-3/4" X 1-3/4" 1/2" Hole Bryke Racing 303-104

Large Roll Cage Gusset

Lg. Gusset Roll Cage Gusset Dimensions: 3-1/2" x 2-3/4" x 4-1/8" Thickness: 1/8"

Bolt On Shock Mount

Bolt-On Shock Mount Clamps to 1-1/2" tubing 1-1/4" from edge of tubing to center of shock bolt Your choice of 2", 3", or 4" from center of tubing to center of shock bolt Steel Includes bolts and shock spacer Bryke Racing Part# 303-31x

Shock Mount Wide

Shock Mount - Wide Measures 1-3/4" OD Wide (1-1/2" ID) X 2" Long Flat Bottom Includes Bolt, Nut, & Spacer Bryke Racing Part# 303-300    

Shock Mount Narrow

Shock Mount - Narrow Measures 1-1/4" OD Wide (1" ID) X 2" Long Concave Bottom Includes Bolt, Nut, & Spacer Bryke Racing Part# 303-301    

1" Weld on Notched Shock Mount

1"” Weld on Notched Shock Mount Overall length 2" Concave to center bolt 1" Inside to inside width 1-1/2" Outside to outside width 1-3/4" Steel Shock Mounting Brackets Includes Nuts and Bolts Bryke Part# 303-302

2" Weld on Notched Shock Mount

2"” Weld on Notched Shock Mount Overall length 3" Concave to center bolt 2" Inside to inside width 1-3/4" Outside to outside width 2" Steel Shock Mounting Brackets Includes Nuts and Bolts Bryke Part# 303-303

3" Weld on Notched Shock Mount

3” Weld on Notched Shock Mount Overall length 4" Concave to center of bolt 3" Width inside to inside 1-3/4 Width outside to outside 2" Steel Shock Mounting Brackets Includes Nuts and Bolts Bryke Part# 303-304

4" Weld-On Notched Shock Mount

4” Weld on Notched Shock Mount Overall length 5" Concave to center bolt 4" Inside to inside width 1-3/4" Outside to outside width 2" Steel Shock Mounting Brackets Includes Nuts and Bolts Bryke Part# 303-305

Shock Mount 2 hole

Shock Bracket 2 Hole Overall Length 3-1/4" Length from inside of radius to end 2-3/4" Outside to Outside width 2" Center to center between bolt holes 1" Edge to center of 1st bolt hole 1/2" Includes Bolt, Nut, & Spacer Bryke Racing Part# 303-315

Shock Mount 3 Hole

Shock Bracket 3 Hole Overall Length 5-3/4" Length from inside of radius to end 5-1/4" Outside to Outside width 2" Center to center between bolt holes 1" Edge to center of 1st bolt hole 1/2" Includes Bolt, Nut, & Spacer Bryke Racing Part# 303-316

Steel Mount

< Steel Mount Clamps to 1-1/2" tubing 1/2"-13 (coarse) thread Can be used for mounting ballast or suspension components Bryke Racing Part# 302-115

Fuel Cell Mount-2"

Fuel Cell Mount Channeled .085 Thick 1-3/4" Wide 3/8" Hole 2" Long

3" Fuel Cell Mount

Fuel Cell Mount Channeled .085 Thick 1-3/4" Wide 3/8" Holes 3" Long

Fuel Cell Mount-4 3/4"

Fuel Cell Mount Channeled .085 Thick 1-3/4" Wide 3/8" Holes 4-3/4" Long

Hood Pin Boss

Hood Pin Boss 1/2"-20

Shock Pin with Clip

Shock Mount Pin With Clip Steel Shoulder Length: 7/8" Stem Length: 1-5/8" Edge to first pin hole: 1-7/8" Edge to second pin hole: 2-1/4" Overall Length: 2-1/2" Bryke Racing Part# 302-100

Accessory Roll Bar Clamp

Weight mount / Accessory Mount Aluminum Color: Black Accessory Hole Size: 1/4"-20 Clamp Size: 1", 1-1/4", 1-1/2", 1-3/4" Accessory hole extends through mount Works great for mounting all kinds of stuff Bryke Racing Part# 305-033x4