Control Arms

  • Upper Control Arm 10in Centered

    Upper Control Arm 10in Centered

    Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x
    $159.95
    Choose Options
  • Upper Control Arm 11in Centered

    Upper Control Arm 11in Centered

    Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x
    $159.95
    Choose Options
  • Upper Control Arm 8in Centered

    Upper Control Arm 8in Centered

    Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x
    $159.95
  • Metric LH Lower Control Arm Press-In Ball Joint Metric LH Lower Control Arm Press-In Ball Joint

    Metric LH Lower Control Arm Press-In Ball Joint

    Driver Side Metric Stock Lower Control Arm Kit These are built using premium lower control arms Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be...
    $219.95
    Add to Cart
  • Metric RH Lower Control Arm Press-In Ball Joint Metric RH Lower Control Arm Press-In Ball Joint

    Metric RH Lower Control Arm Press-In Ball Joint

    Passenger Side Metric Stock Lower Control Arm Kit These are built using premium lower control arms Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to...
    $219.95
    Add to Cart
  • Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint

    Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint

    Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower...
    $164.95
    Add to Cart
  • Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint

    Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint

    Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower...
    $164.95
    Add to Cart
  • Chevelle RH Lower Control Arm KIT Chevelle RH Lower Control Arm KIT

    Chevelle RH Lower Control Arm KIT

    Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded K727 Screw in ball joint adapter installed and welded Reinforced front section to help keep control arm from bending Shock mount is included but will...
    $199.95
    Add to Cart
  • Chevelle LH Lower Control Arm KIT Chevelle LH Lower Control Arm KIT

    Chevelle LH Lower Control Arm KIT

    Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded K727 Screw in ball joint adapter installed and welded Reinforced front section to help keep control arm from bending Shock mount is included but will need...
    $199.95
    Add to Cart
  • Metric Upper Control Arm Small BJ RH

    Metric Upper Control Arm Small BJ RH

    Upper Control Arm RH GM Metric Offset 1-1/4" 6-7/8" Bolt Spacing on Cross Shaft Bolt-In Steel Powder Coated Gloss Black Fits Small Ball Joints Bryke Racing Part #: KEY 100-06-0xxxRHS-1
    $89.95
    Choose Options
  • Metric Upper Control Arm Small BJ LH

    Metric Upper Control Arm Small BJ LH

    Upper Control Arm LH GM Metric Offset 1-1/4" 6-7/8" Bolt Spacing on Cross Shaft Bolt-In Steel Powder Coated Gloss Black Fits Small Ball Joints Bryke Racing Part #: KEY 100-06-0xxxLHS-1
    $89.95
    Choose Options
  • Metric GM Rear Control Arm Bushings 8 Pack

    Metric GM Rear Control Arm Bushings 8 Pack

    Metric Rear Control Arm Bushings Rubber trailing arm bushings Fits: '78-'88 Metric GM Rear Upper and Lower Control Arms 1965 - '88 Chevelle Monte Carlo, Cutlass, Regal, and Skylark 1.92" OD x .500" ID 8 Pack Bryke Racing Part #: 450-010
    $59.95
    Add to Cart
  • Rear End Control Arm KIT 79-88 Metric

    Rear End Control Arm KIT 79-88 Metric

    Rear End Upper and Lower Control Arm Kit Fits '79 - '88 Metric GM G-Body Kit Includes: (2) Metric Upper Control Arm (2) Metric Lower Control Arm Bryke Racing Part #: 450-000K
    $269.95
    Add to Cart
  • PREMIUM Lower Control Arm 79-88 GM Metric RH

    PREMIUM Lower Control Arm 79-88 GM Metric RH

    Premium Metric GM Lower Control Arm RH Fits 1979-1988 Metric GM G-Body Bushing sizes 1.450" and 1.650" Black Finish Holes are drilled after the manufacturing process to insure proper alignment and fit of ball joints & bushings Spring pocket is...
    $139.95
  • PREMIUM Lower Control Arm 79-88 GM Metric LH

    PREMIUM Lower Control Arm 79-88 GM Metric LH

    GM Metric Lower Control Arm LH Fits 1979-1988 Metric GM G-Body Bushing Sizes 1.450" and 1.650" Black Finish Holes are drilled after the manufacturing process to insure proper alignment and fit of ball joints & bushings Spring pocket is made to...
    $139.95
    Add to Cart
  • Upper Control Arm GM Metric

    Upper Control Arm GM Metric

    Upper Control Arm Mounting Bolt Pattern: 6-7/8" Ball Joint Spacing: 8" RH Side Ball Joint Spacing: 8.5" LH Side Ball Joint Style: Small Bolt-In Tubular - Steel Steel Cross Shaft Fits GM Metric and bolts to your stock mount Use Ball joints...
    $39.95
    Choose Options
  • Ball Joint Holder Small K772

    Ball Joint Holder Small K772

    Ball Joint Holder Small K772 Tall: 1.25in OD: 2.25in ID: 1.840in Moog Reference: K772 Fits: Bryke Racing Part# 320-122 Fits: QA1 1210-105, QA1 1210-201s, QA1 1210-238s Fits: HOWE 22300, 22330, 22335, 223310, 22320, 22330, 22335,...
    $13.95
    Add to Cart
  • Upper Ball Joint Holders

    Upper Ball Joint Holders

    Upper Ball joint holder. Centered Can be used on both the left and right hand side. Uses Standard Upper Screw- Ball Joint Bryke Racing Part# 320-203 Moog #K772 AFCO 20034LF 5/8" RH Male Thread 3/8" Hole, commonly used with a clevis
    $19.95
    Add to Cart
  • Small Ball Joint Pin Small Ball Joint Pin

    Small Ball Joint Pin

    Small Ball Joint Replacement pin Lengths include: Standard Length -1/2" shorter than standard +1/2" Longer than standard +1" Longer than Standard Bryke Racing Part# 320-107
    $29.95
    Choose Options
  • Upper Control Arm

    Upper Control Arm

    Adjustable upper control arm assembly Lightweight and fully adjustable Uses heims so there is nothing to bind up. Includes (2) Heims (4) Jam Nuts (1) Ball-Joint Holder (1) Clevis (1) 5" x 5/8 tube (1) 6" x 5/8 tube. If you require different size...
    $69.95
    Add to Cart
  • Clevis Clevis

    Clevis

    Clevis 5/8"-18 right hand threads 3/8" bore 3/8" slot Bryke Racing Part# 320-202
    $9.95
    Add to Cart
  • Screw in Ball Joint Adapter for Chevelle Lower

    Screw in Ball Joint Adapter for Chevelle Lower

      Screw In Ball Joint Adapter Ideal for modifying stock style Chevelle Lower Control Arms to accept a screw-in style ball joint Sleeve O.D.: 2.010" 1-1/4" Tall Fits Moog K772 style Screw-In Style Ball joints Note: Modifications to control arm may...
    $14.95
    Add to Cart
  • 5/8 Double Adjuster Linkage

    5/8 Double Adjuster Linkage

    5/8 Double Side Linkage Adjuster 5/8"-18 thread Double sided Available in Right Hand Female x Left Hand Male and Left Hand Female x Right Hand Male Material: Steel Black Bryke Racing Part #: WEHWM245
    $19.95
    Choose Options