Toggle menu
1-888-834-4358
  • 0
  • In Store Pick Up Items
  • New Products
  • Specials
  • AFCO Shocks
  • Apparel
  • Bearings and Seals
  • Body Accessories
  • Brake Accessories
  • Carb and Fuel Accessories
  • Chassis & Suspension
  • Combo SPECIALS
  • Cooling Accessories
  • Drive Shafts
  • Electronics
  • Engine Accessories
  • Exhaust
  • Front End Components
  • Gauges & Accessories
  • Go-Kart Parts
  • Gussets and Tabs
  • Heims / Jam Nuts / Spacers
  • Ignition
  • Oil and Lubricants
  • Quarter Turn Fasteners
  • Rear End Components
  • Rivets
  • Safety Equipment
  • Seats
  • Springs
  • Starters
  • Steering Accessories
  • Tools
  • Transmission & Clutch Accessories
  • Wheel & Tire Accessories
  • Shop by Brand
  • Bryke Racing
  • Wehrs
  • Bryke Fasteners
  • QuickCar
  • Fragola
  • Zamp
  • Holley
  • Maxima Racing Oils
  • AFCO
  • Wilwood
  • View all Brands
  • In Store Pick Up Items
  • New Products
  • Specials
  • AFCO Shocks
  • Apparel
  • Bearings and Seals
  • Body Accessories
  • Brake Accessories
  • Carb and Fuel Accessories
  • Chassis & Suspension
  • Combo SPECIALS
  • Cooling Accessories
  • Drive Shafts
  • Electronics
  • Engine Accessories
  • Exhaust
  • Front End Components
  • Gauges & Accessories
  • Go-Kart Parts
  • Gussets and Tabs
  • Heims / Jam Nuts / Spacers
  • Ignition
  • Oil and Lubricants
  • Quarter Turn Fasteners
  • Rear End Components
  • Rivets
  • Safety Equipment
  • Seats
  • Springs
  • Starters
  • Steering Accessories
  • Tools
  • Transmission & Clutch Accessories
  • Wheel & Tire Accessories

    • Shop by Brand

  • Bryke Racing
  • Wehrs
  • Bryke Fasteners
  • QuickCar
  • Fragola
  • Zamp
  • Holley
  • Maxima Racing Oils
  • AFCO
  • Wilwood
  • View all Brands

    • Front End Components

    • Spring Cup

      Spring Cup

      Spring Cup Fits both 5" or 5-1/2 Springs Overall length: 3-1/4" Length from top of plate to bottom of weight jack bolt 3" Bryke Racing Part #320-320
      $12.95
      Add to Cart
    • Weight Jack Cup Lightweight Weight Jack Cup Lightweight

      Weight Jack Cup Lightweight

      Weight Jack Cup Lightweight Save .75lb per cup over traditional weight jack cups For 1" Jack Bolts Dimensions: 5" across flange, 3" across bottom, 2-1/8" flange lip Bryke Racing Part# 320-321
      MSRP: $12.99
      $12.95
      Add to Cart
    • Swiveler Weight Jack

      Swiveler Weight Jack

      Swiveler Weight Jack Standard 1" Course bolt Will fit on 5" and 5-1/2" springs Allows cup in top of spring to pivot on bolt eliminating bind during travel. Bryke Racing Part# 320-322
      MSRP: $34.99
      $34.95
      Add to Cart
    • Horizontal Weight Jack Mount

      Horizontal Weight Jack Mount

      Clamps on 1-1/2" tubing. Easily install weight jack boss where its needed. Accepts standard 1" coarse weight jack bolt. Bryke Part#: 320-329
      $21.95
      Add to Cart
    • Spring Spacer Adjustable Spring Spacer Adjustable

      Spring Spacer Adjustable

      Adjustable Spring Spacer Adjusts up to 3" Overall height: 2-1/2" Works on front or back springs on both 5" or 5-1/2" springs Bryke Racing Part# 320-301
      $34.95
      Add to Cart
    • Spring Spacer Adjustable to 3" Spring Spacer Adjustable to 3"

      Spring Spacer Adjustable to 3"

      Adjustable Spring Spacer Adjusts up to 3" Works on front or back springs on both 5" or 5-1/2" springs Includes one spring spacer Bryke Racing Part# 320-302
      $37.95
      Add to Cart
    • Spring Spacer Adjustable to 5" Spring Spacer Adjustable to 5"

      Spring Spacer Adjustable to 5"

      Adjustable Spring Spacer Adjusts up to 5" Extra adjustment- works great on Limited Modifieds Includes one spring spacer Bryke Racing Part# 320-304
      MSRP: $34.99
      $34.95
      Add to Cart
    • 15.5" Dropped Tie Rod-Quad Bend

      15.5" Dropped Tie Rod-Quad Bend

      15.5" Dropped Tie Rod Designed for Maximum Clearance Quad Bend Gives 1.5" of Clearance on the right front frame horn Features 5/8-18" RH/LH Threads Bryke Racing Part #: 301-9155
      $30.95
      Add to Cart
    • Ball Joint Holder Small K772

      Ball Joint Holder Small K772

      Ball Joint Holder Small K772 Tall: 1.25in OD: 2.25in ID: 1.840in Moog Reference: K772 Fits: Bryke Racing Part# 320-122 Fits: QA1 1210-105, QA1 1210-201s, QA1 1210-238s Fits: HOWE 22300, 22330, 22335, 223310, 22320, 22330, 22335,...
      $13.95
      Add to Cart
    • Upper Ball Joint Holders

      Upper Ball Joint Holders

      Upper Ball joint holder. Centered Can be used on both the left and right hand side. Uses Standard Upper Screw- Ball Joint Bryke Racing Part# 320-203 Moog #K772 AFCO 20034LF 5/8" RH Male Thread 3/8" Hole, commonly used with a clevis
      $19.95
      Add to Cart
    • QA1 UPPER Ball Joint Studs

      QA1 UPPER Ball Joint Studs

      QA1 9029-201 Taper: 1-1/2" Ball Size: 1.437" Height: +.500" longer than standard stud Replacement Pin for QA1 Ball Joint 1210-201 Upper 4 Bolt LG, 63-71 GM trucks, Some dirt late models Moog Equivalent: K6024 but adds .500" Replacement Pin for...
      $34.95
      Choose Options
    • QA1 LOWER Ball Joint Studs

      QA1 LOWER Ball Joint Studs

      QA1 9029-211 Taper: 1-1/2" Ball Size: 1.437" Height: +.500" longer than standard stud Replacement Pin for QA1 Ball Joint 1210-110 that adds +.500" Moog Equivalent: K5103 but adds .500" Lower Press-in 1964-72 Chevelle / 1968-74 Nova /...
      $34.95
      Choose Options
    • Upper Ball Joint Screw In

      Upper Ball Joint Screw In

      Screw in ball joint Fits screw-in upper a-arms 1-1/2 Taper also fits Upper and Lower Pinto Spindles Bryke Racing Part# 320-122
      MSRP: $14.99
      $14.95
      Add to Cart
    • Lower Ball Joint Press in

      Lower Ball Joint Press in

      Lower Ball Joint Material: Steel Mounting Style: Press in Fits 64-72 Chevelle 1-1/2" Taper Greaseable K5103 Bryke Racing Part #: 320-140
      MSRP: $15.00
      $14.95
      Add to Cart
    • Lower Ball Joint Press in Tall

      Lower Ball Joint Press in Tall

      Lower Ball Joint TALL Fits 68-72 Chevelle Lowers 2" Taper (must ream pinto spindles) Greasable Mounting Style: Press In (may have to weld in) Bryke Racing part#: 320-141
      MSRP: $15.00
      $14.95
      Add to Cart
    • Upper Ball Joint GM Large Bolt In QA1 Low Friction

      Upper Ball Joint GM Large Bolt In QA1 Low Friction

      Upper Ball Joint GM Large Bolt In Low Friction IMCA Modified and street stocks. Fits most racing upper a-arms. Large Bolt in. 2" taper. 3/8" longer than stock stud used to raise roll center. Moog Reference# K6136 Bryke Racing Part # QA1 1210-103
      $84.95
      Add to Cart
    • QA1 Upper Ball Joint GM Metric Bolt In SMALL 4 Bolt

      QA1 Upper Ball Joint GM Metric Bolt In SMALL 4 Bolt

      Upper Ball Joint GM Metric Bolt In Low Friction Stock GM upper a-arm ball joint that fits full size: 71-85 Impala spindles 70-81 Camaro 73-88 Chevelle/Metric Small bolt in 2" taper Does not fit AFCO upper arms. Moog Reference# K5208 Bryke Racing Part #...
      $84.95
      Add to Cart
    • Upper Ball Joint Screw In QA1 Low Friction

      Upper Ball Joint Screw In QA1 Low Friction

      Upper Ball Joint Screw In / 1-1/2" taper Low Friction Fits most Screw-in upper a-arms including AFCO, Howe, and Dirt Works Also fits upper and lower tapers in Pinto spindles. Moog Reference# K772 Bryke Racing Part # QA1 1210-105  
      $84.95
      Add to Cart
    • Upper Ball Joint Plus .500 Screw In Low Friction

      Upper Ball Joint Plus .500 Screw In Low Friction

      Upper Ball Joint 1/2" longer stud to raise roll centers Screw In / 1-1/2" taper Low Friction Fits most Screw-in upper a-arms including AFCO, Howe, and Dirt Works Also fits upper and lower tapers in Pinto spindles. Bryke Racing Part # QA1 1210-201S
      $84.95
      Add to Cart
    • QA1 Lower Ball Joint Screw In

      QA1 Lower Ball Joint Screw In

      QA1 Lower Ball Joint Type: Screw In Fits 1971-1976 Impala 2" Taper Ball size: 1.625" Popular in Dirt Late Models Moog Reference: K6141 Bryke Racing Part #: QA1 1210-102
      $84.95
      Add to Cart
    • QA1 Lower Ball Joint Press In plus 3/8

      QA1 Lower Ball Joint Press In plus 3/8

      QA1 Low Friction Lower Ball Joint Press In Type: Press In Fits 1971-95 GM truck 2" Taper Ball Size: 1.625" Popular in Dirt Modifieds Moog Reference: K6117 Bryke Racing Part #: QA1 1210-108
      $84.95
      Add to Cart
    • Lower Ball Joint GM Metric Press In QA1 Low Friction

      Lower Ball Joint GM Metric Press In QA1 Low Friction

      Low Friction Lower Ball Joint GM Metric Press In 2" Taper Stock GM lower ball joint that fits; 70-02 Camaro 73-88 Chevelle 77-85 Impala 73-88 Monte Carlo All Metric Frame Cars Moog Reference# K6145 Bryke Racing Part # QA1 1210-109
      $84.95
      Add to Cart
    • Lower Ball Joint Press In GRT

      Lower Ball Joint Press In GRT

      Lower Ball Joint Type: Press In Fits Rayburn, GRT, Rayburn, Warrior, Port City and popular fabricated lowers Popular in dirt Late Models Moog Reference #: K6141 Bryke Racing Part #: QA1 1210-112    
      $84.95
      Add to Cart
    • Small Ball Joint Pin Small Ball Joint Pin

      Small Ball Joint Pin

      Small Ball Joint Replacement pin Lengths include: Standard Length -1/2" shorter than standard +1/2" Longer than standard +1" Longer than Standard Bryke Racing Part# 320-107
      $29.95
      Choose Options
    • Small Ball Joint Assembly Small Ball Joint Assembly

      Small Ball Joint Assembly

      Small Ball Joint Upper Control Arm Assembly Ball joint housing Standard Length Ball Joint Pin Steel Cap Low Friction ball joint assembly Easily replace ball joint pin lengths or bent ball joint pins Provides a lot more clearance on your front...
      $88.95
      Choose Options
    • Upper Control Arm

      Upper Control Arm

      Adjustable upper control arm assembly Lightweight and fully adjustable Uses heims so there is nothing to bind up. Includes (2) Heims (4) Jam Nuts (1) Ball-Joint Holder (1) Clevis (1) 5" x 5/8 tube (1) 6" x 5/8 tube. If you require different size...
      $69.95
      Add to Cart
    • Clevis Clevis

      Clevis

      Clevis 5/8"-18 right hand threads 3/8" bore 3/8" slot Bryke Racing Part# 320-202
      $9.95
      Add to Cart
    • Howe Upper Ball Joint Screw In Standard Stud

      Howe Upper Ball Joint Screw In Standard Stud

      Howe Upper Ball Joint Type: Screw-In Taper: 1-1/2" Ball Size: 1.437" 3.340" Stud Steel Cap K772 Fits Popular Modified and Late Model Ball Joint with Screw-In Housing and Upper and Lower Taper of Pinto Spindle Bryke Racing Part #: HOW...
      $97.95
      Add to Cart
    • Howe Upper Ball Joint Screw In .500in Longer Stud

      Howe Upper Ball Joint Screw In .500in Longer Stud

      Howe Upper Ball Joint Type: Screw-In Taper: 1-1/2" Ball Size: 1.437" 3.840" Stud (1/2" Longer Stud) Steel Cap K772 Popular Modified and Late Model Ball Joint with Screw-In Housing. Upper and Lower Taper of Pinto Spindle Bryke Racing Part...
      $97.95
      Add to Cart
    • Howe Upper Ball Joint Screw In 1.00in Longer Stud

      Howe Upper Ball Joint Screw In 1.00in Longer Stud

      Howe Upper Ball Joint Type: Screw-In Taper: 1-1/2" Ball Size: 1.437" 4.340" Stud (1" Longer Stud) Steel Cap K772 Popular Modified and Late Model Ball Joint with Screw-In Housing. Upper and Lower Taper of Pinto Spindle Bryke Racing Part #:...
      $97.95
      Add to Cart
    • Howe Replacement Stud for 22320 Standard Stud

      Howe Replacement Stud for 22320 Standard Stud

      Howe Upper Ball Joint Pin Taper: 1-1/2" Ball Size: 1.437" 3.340" Stud K772 Popular Modified and Late Model Ball Joint with Screw-In Housing. Upper and Lower Taper of Pinto Spindle Bryke Racing Part #: HOW 22330
      $46.95
      Add to Cart
    • Howe Replacement Stud for 22320 Plus .500in Longer

      Howe Replacement Stud for 22320 Plus .500in Longer

      Howe Upper Ball Joint Pin Taper: 1-1/2" Ball Size: 1.437" 3.840" Stud (1/2" Longer) K772 Popular Modified and Late Model Ball Joint with Screw-In Housing. Upper and Lower Taper of Pinto Spindle Bryke Racing Part #: HOW 22335
      $46.95
      Add to Cart
    • Howe Replacement Stud for 22320 Plus 1.00in Longer

      Howe Replacement Stud for 22320 Plus 1.00in Longer

      Howe Upper Ball Joint Pin Taper: 1-1/2" Ball Size: 1.437" 4.340" Stud (1" Longer) K772 Popular Modified and Late Model Ball Joint with Screw-In Housing. Upper and Lower Taper of Pinto Spindle Bryke Racing Part #: HOW 223310
      $49.95
      Add to Cart
    • Howe Replacement Stud for 22412 Standard

      Howe Replacement Stud for 22412 Standard

      Howe Lower Ball Joint Pin Taper: 1-1/2" Ball Size: 1.625" 3.820" Stud K727 Fits nearly all strut cars, Larger taper Late Models and Large Chrysler Bryke Racing Part #: HOW 22440
      $49.95
      Add to Cart
    • Howe Lower Ball Joint K6117 Standard Stud

      Howe Lower Ball Joint K6117 Standard Stud

      Howe Lower Ball Joint Type: Press-In Taper: 2" Ball Size: 1.625" 4.310" Stud Steel Cap K6117 Fits 71-95 GM Truck, Popular Dirt Modified and Street Stock Ball Joint Bryke Racing Part #: HOW 22419S
      $99.95
      Add to Cart
    • Howe Lower Ball Joint K6145 Standard Stud

      Howe Lower Ball Joint K6145 Standard Stud

      Howe Lower Ball Joint Type: Press-In Taper: 2" Ball Size: 1.437" 3.410" Stud Steel Cap K6145 Fits 77-96 Impala, 70-'02 Camaro, 73-88 Chevelle, Malibu and Monte Carlo. Popular amongst Metric Cars and Mini Stocks Bryke Racing Part #: HOW...
      $99.95
      Add to Cart
    • Howe Replacement Stud for 22420 Standard Stud

      Howe Replacement Stud for 22420 Standard Stud

      Howe Lower Ball Joint Pin Taper: 2" Ball Size: 1.437" 3.410" Stud Steel Cap K6145 Fits 77-96 Impala, 70-'02 Camaro, 73-88 Chevelle, Malibu and Monte Carlo. Popular amongst Metric Cars and Mini Stocks Bryke Racing Part #: HOW 22470
      $49.95
      Add to Cart
    • Howe Replacement Stud for 22420 Plus .500 Longer Stud

      Howe Replacement Stud for 22420 Plus .500 Longer Stud

      Howe Lower Ball Joint Pin Taper: 2" Ball Size: 1.437" 3.910" Stud (1/2" Longer Stud) K6145 Fits 77-96 Impala, 70-'02 Camaro, 73-88 Chevelle, Malibu and Monte Carlo. Popular amongst Metric Cars and Mini Stocks Bryke Racing Part #: HOW 22475
      $49.95
      Add to Cart
    • Screw in Ball Joint Adapter for Chevelle Lower

      Screw in Ball Joint Adapter for Chevelle Lower

        Screw In Ball Joint Adapter Ideal for modifying stock style Chevelle Lower Control Arms to accept a screw-in style ball joint Sleeve O.D.: 2.010" 1-1/4" Tall Fits Moog K772 style Screw-In Style Ball joints Note: Modifications to control arm may...
      $14.95
      Add to Cart
    • Lower Ball Joint Sleeve K727

      Lower Ball Joint Sleeve K727

      Lower Ball Joint Sleeve Fits Lg. Screw-in Ball Joints OD: 2-5/16in ID: 2in Tall: 1-5/16in Steel Fits: K6141 & K727 Fits: QA1 1210-102, QA1 1210-106, HOW 22410, HOW 22412 Bryke Racing Part #: 320-285
      MSRP: $14.95
      $13.95
      Add to Cart
    • Pinto Spindle Pinto Spindle

      Pinto Spindle

      Pinto/Mustang II Spindle Pinto Spindles work great on Modifieds, Sportsman cars, Drag Cars, and Street Cars. Not IMCA Legal Your choice of Driver's Side (Left) or Passenger Side (Right) or both Bryke Racing Part #320-00x    
      $89.99 - $174.95
      Choose Options
    • 3 Piece PINTO Spindles 3 Piece PINTO Spindles

      3 Piece PINTO Spindles

      3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering...
      $149.95 - $289.95
      Choose Options
    • 3 Piece Metric Spindle 3 Piece Metric Spindle

      3 Piece Metric Spindle

      3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for...
      $149.95 - $289.95
      Choose Options
    • Metric Spindle Savers

      Metric Spindle Savers

      Metric Spindle Savers Material: Steel Fit Metric Spindles 1978 and up Held in place by the ball joint and tie rod retaining nut Also works great as a tool to check to see if spindles are already bent Pair Bryke Racing Part#320-100
      $19.95
      Add to Cart
    • QuickCar Ride Height Gauge

      QuickCar Ride Height Gauge

      Back by popular demand. QuickCar's easy to use ride height gauge is put under the frame, and when button is depressed a etched stem pops out and reads the height between the ground and frame. QuickCar Ride Height Gauge Measures 3-1/2" to 6" Small and...
      $26.95
      Add to Cart
    • QuickCar Caster Camber Gauge with Magnetic Adapter QuickCar Caster Camber Gauge with Magnetic Adapter

      QuickCar Caster Camber Gauge with Magnetic Adapter

      QuickCar Caster Camber Gauge with Magnetic Adapter CNC Machined for accuracy Anodized billet aluminum 6 degree Camber, 8 degree Caster Quickcar Caster/Camber gauges are calibrated and bench tested for accuracy. Accurate caster & camber on a...
      $179.95
      Add to Cart
    • Metric Stock Spindle LH

      Metric Stock Spindle LH

      Metric Stock Spindle LH Fits 1979 and Up Midsize Metric Cars Uses Stock Ball Joints Fits '79-'81 Rotor Bryke Racing Part #: 320-030
      $119.95
      Add to Cart
    • Metric Stock Spindle RH

      Metric Stock Spindle RH

      Metric Stock Spindle RH Fits 1979 and Up Midsize Metric Cars Uses Stock Ball Joints Fits '79-'81 Rotor Bryke Racing Part #: 320-031
      $119.95
      Add to Cart
    • Spindle Nut Kit 2" Steel

      Spindle Nut Kit 2" Steel

        Spindle Nut Kit Kit Includes: Spindle Nut  Keyed Washer 2 Screws 2" Pin 1-13/16"-16 RH Threads Steel For Wide 5 and 5x5 hubs Fits Allstar, Howe, PCR 5x5, and most wide 5 hubs Bryke Racing Part #: 400-025  
      $16.95
      Add to Cart
    • Spindle Nut Kit 2" Aluminum

      Spindle Nut Kit 2" Aluminum

        Spindle Nut Kit Kit Includes: Spindle Nut Keyed Washer 2 Screws 2" Pin 1-13/16"-16 RH Threads Aluminum For Wide 5 and 5x5 hubs Fits Allstar, Howe, PCR 5x5, and most wide 5 hubs Bryke Racing Part #: 400-026  
      $14.95
      Add to Cart
    • Spindle Nut Kit 2.5" Steel

      Spindle Nut Kit 2.5" Steel

        Spindle Nut Kit Kit Includes: Spindle Nut Keyed Washer 2 Screws 2.5" Pin Thread: 2-3/8"-18 Steel Available in both Right Hand & Left Hand threads For 5x5 hubs Fits AFCO, Winters, and SCP 5x5 GN Bryke Racing Part #: 400-03  
      $23.95
      Choose Options
    • Metric Center Link

      Metric Center Link

      78 - 88 Metric Drag Link / Center Link Works great on IMCA Modifieds etc. Bryke Racing Part # 320-209
      $39.95
      Add to Cart
    • Idler Arm

      Idler Arm

      Chevelle '68 - '72 Chevelle Idler Arm Works great on IMCA Modifieds etc. Bryke Racing Part# 320-206 Metric '78 to '88 Metric Idler Arm
      $19.95 - $22.95
      Choose Options
    • Bumpsteer Spacer Kit

      Bumpsteer Spacer Kit

      Bumpsteer Spacer Kit Reduces/Eliminates unwanted Bumpsteer Reduces Lap Times Improves Handling Won't Bend like other Bumpsteer spacers 2" in length 1-1-4" O.D. at widest point 7/8" O.D. at narrowest point 5/8 ID 5/8" Grade 8 Coarse...
      $31.95
      Add to Cart
    • Bumpsteer Spacers

      Bumpsteer Spacers

      Bumpsteer Spacers Reduces/Eliminates unwanted Bumpsteer Reduces Lap Times Improves Handling Won't Bend like other Bumpsteer spacers 2" in length 1-1-4" O.D. at widest point 7/8" O.D. at narrowest point 5/8 ID Pair
      $21.95
      Add to Cart
    • Hybrid Brake Rotor

      Hybrid Brake Rotor

      Hybrid Brake Rotor 10.13" OD X .813" Thick The Hybrid Brake Rotor combines the strength of Ford Granada hub with light weight of a GM Metric Rotor New Casting For use with metric calipers and Hybrid brake caliper brackets, and '74-80 Pinto/Mustang II...
      $78.95
    • Hub Master Installation Kit Hybrid

      Hub Master Installation Kit Hybrid

      Hub Master Installation Kit Hybrid AFCO The master installation kit allows you to install your AFCO hybrid rotor on any Ford pinto spindle Kit includes inner and outer bearings, hub seal, spindle nut with lock, and dust cap Bryke Racing Part #: AFC...
      $39.95
    • AFCO GM Metric Rotor '79 and Up

      AFCO GM Metric Rotor '79 and Up

      AFCO GM Metric Rotor '79 and Up 10.5" OD 1" Thick 5 x 5 Bolt Pattern (also drilled for 5 x 4 3/4 bolt pattern) For use with Metric Calipers and 3-Piece Spindles Bryke Racing Part #: AFC 9850-6500
      $78.95
    • Metric Rotor and Bearing Kit

      Metric Rotor and Bearing Kit

      Metric Rotor and Bearing Kit   Metric Rotor: 10.5" OD X 1.00" Thick For use with metric Spindles ‘79-Â’88 Uses Metric bearings and seals 5/8" Wheel studs are installed for 5 on 5 bolt pattern (Also drilled for 5 on 4 3/4" Bolt Pattern) Long...
      $129.95
      Add to Cart
    • Metric Rotor, Spindle and Bearing Kit Metric Rotor, Spindle and Bearing Kit

      Metric Rotor, Spindle and Bearing Kit

      Metric Rotor, Sprindle and Bearing Kit Metric Rotor: 10.5" OD X 1.00" Thick Constructed from a proprietary Iron Alloy for improved strength and durability For use with metric Spindles ‘79-’88 Uses Metric bearings and seals 5/8" Wheel studs are...
      $278.95 - $549.95
      Choose Options
    • Wilwood GM Metric Brake Rotor

      Wilwood GM Metric Brake Rotor

      Wilwood GM Metric Brake Rotor OD: 10.5" Thickness: 1" Wheel Bolt Patern: 5 x 5 Long Wheel studs: 5/8-11 x 3-1/2" Fits GM Metric Spindle including Metric 3 piece spindles (Part# 320-01_) Has Thin Layer of Protection on Rotor to prevent...
      $104.95
      Add to Cart
    • Hub Master Installation Kit Metric

      Hub Master Installation Kit Metric

      Hub Master Installation Kit Metric AFCO The master installation kit allows you to install your AFCO metric rotor on any metric spindle Kit includes inner and outer bearings, hub seal, spindle nut with lock, and dust cap Bryke Racing Part #: AFC...
      $41.95
      Add to Cart
    Compare Selected