Close Racing Supply sku: CRS 107-x Upper Control Arm 10in Centered MSRP: Was: Now: $159.95 Choose Options Compare Close Racing Supply sku: CRS 108-x Upper Control Arm 11in Centered MSRP: Was: Now: $159.95 Compare Close Racing Supply sku: CRS 106-x Upper Control Arm 8in Centered MSRP: Was: Now: $159.95 Choose Options Compare PEM Gears sku: PEM HMBLMULTIB-ON Trailing Arm Bracket w/ Mult Hole Clamp on MSRP: Was: Now: $159.95 Add to Cart Compare sku: 320-260-Kit2 Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint MSRP: Was: Now: $164.95 Compare sku: 320-250-Kit2 Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint MSRP: Was: Now: $164.95 Add to Cart Compare sku: WEH WM407 Wehrs Panhard Mount for QuickChange MSRP: Was: Now: $160.95 Add to Cart Compare Wehrs sku: WEH WM241150 Steel ARC Frame Mount Climber 1-1/2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM24120 Steel ARC Frame Mount Climber 2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM419 Wehrs Quick Change Pinion Mount with Seal Plate MSRP: Was: Now: $159.95 Add to Cart Compare Bryke Racing sku: 301-764 3/4 Steel Swedge Tube Kit 4 MSRP: Was: Now: $159.95 Choose Options Compare Bryke Racing sku: 320-01x 3 Piece PINTO Spindles MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Bryke Racing sku: 320-01 3 Piece Metric Spindle MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Upper Control Arm 10in Centered Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x MSRP: Was: Now: $159.95 Choose Options Compare Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Close Racing Supply sku: CRS 108-x Upper Control Arm 11in Centered MSRP: Was: Now: $159.95 Compare Close Racing Supply sku: CRS 106-x Upper Control Arm 8in Centered MSRP: Was: Now: $159.95 Choose Options Compare PEM Gears sku: PEM HMBLMULTIB-ON Trailing Arm Bracket w/ Mult Hole Clamp on MSRP: Was: Now: $159.95 Add to Cart Compare sku: 320-260-Kit2 Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint MSRP: Was: Now: $164.95 Compare sku: 320-250-Kit2 Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint MSRP: Was: Now: $164.95 Add to Cart Compare sku: WEH WM407 Wehrs Panhard Mount for QuickChange MSRP: Was: Now: $160.95 Add to Cart Compare Wehrs sku: WEH WM241150 Steel ARC Frame Mount Climber 1-1/2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM24120 Steel ARC Frame Mount Climber 2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM419 Wehrs Quick Change Pinion Mount with Seal Plate MSRP: Was: Now: $159.95 Add to Cart Compare Bryke Racing sku: 301-764 3/4 Steel Swedge Tube Kit 4 MSRP: Was: Now: $159.95 Choose Options Compare Bryke Racing sku: 320-01x 3 Piece PINTO Spindles MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Bryke Racing sku: 320-01 3 Piece Metric Spindle MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Upper Control Arm 10in Centered Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x MSRP: Was: Now: $159.95 Choose Options Compare Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Close Racing Supply sku: CRS 106-x Upper Control Arm 8in Centered MSRP: Was: Now: $159.95 Choose Options Compare PEM Gears sku: PEM HMBLMULTIB-ON Trailing Arm Bracket w/ Mult Hole Clamp on MSRP: Was: Now: $159.95 Add to Cart Compare sku: 320-260-Kit2 Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint MSRP: Was: Now: $164.95 Compare sku: 320-250-Kit2 Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint MSRP: Was: Now: $164.95 Add to Cart Compare sku: WEH WM407 Wehrs Panhard Mount for QuickChange MSRP: Was: Now: $160.95 Add to Cart Compare Wehrs sku: WEH WM241150 Steel ARC Frame Mount Climber 1-1/2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM24120 Steel ARC Frame Mount Climber 2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM419 Wehrs Quick Change Pinion Mount with Seal Plate MSRP: Was: Now: $159.95 Add to Cart Compare Bryke Racing sku: 301-764 3/4 Steel Swedge Tube Kit 4 MSRP: Was: Now: $159.95 Choose Options Compare Bryke Racing sku: 320-01x 3 Piece PINTO Spindles MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Bryke Racing sku: 320-01 3 Piece Metric Spindle MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Upper Control Arm 10in Centered Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x MSRP: Was: Now: $159.95 Choose Options Compare Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
PEM Gears sku: PEM HMBLMULTIB-ON Trailing Arm Bracket w/ Mult Hole Clamp on MSRP: Was: Now: $159.95 Add to Cart Compare sku: 320-260-Kit2 Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint MSRP: Was: Now: $164.95 Compare sku: 320-250-Kit2 Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint MSRP: Was: Now: $164.95 Add to Cart Compare sku: WEH WM407 Wehrs Panhard Mount for QuickChange MSRP: Was: Now: $160.95 Add to Cart Compare Wehrs sku: WEH WM241150 Steel ARC Frame Mount Climber 1-1/2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM24120 Steel ARC Frame Mount Climber 2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM419 Wehrs Quick Change Pinion Mount with Seal Plate MSRP: Was: Now: $159.95 Add to Cart Compare Bryke Racing sku: 301-764 3/4 Steel Swedge Tube Kit 4 MSRP: Was: Now: $159.95 Choose Options Compare Bryke Racing sku: 320-01x 3 Piece PINTO Spindles MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Bryke Racing sku: 320-01 3 Piece Metric Spindle MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Upper Control Arm 10in Centered Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x MSRP: Was: Now: $159.95 Choose Options Compare Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
sku: 320-260-Kit2 Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint MSRP: Was: Now: $164.95 Compare sku: 320-250-Kit2 Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint MSRP: Was: Now: $164.95 Add to Cart Compare sku: WEH WM407 Wehrs Panhard Mount for QuickChange MSRP: Was: Now: $160.95 Add to Cart Compare Wehrs sku: WEH WM241150 Steel ARC Frame Mount Climber 1-1/2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM24120 Steel ARC Frame Mount Climber 2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM419 Wehrs Quick Change Pinion Mount with Seal Plate MSRP: Was: Now: $159.95 Add to Cart Compare Bryke Racing sku: 301-764 3/4 Steel Swedge Tube Kit 4 MSRP: Was: Now: $159.95 Choose Options Compare Bryke Racing sku: 320-01x 3 Piece PINTO Spindles MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Bryke Racing sku: 320-01 3 Piece Metric Spindle MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Upper Control Arm 10in Centered Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x MSRP: Was: Now: $159.95 Choose Options Compare Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
sku: 320-250-Kit2 Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint MSRP: Was: Now: $164.95 Add to Cart Compare sku: WEH WM407 Wehrs Panhard Mount for QuickChange MSRP: Was: Now: $160.95 Add to Cart Compare Wehrs sku: WEH WM241150 Steel ARC Frame Mount Climber 1-1/2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM24120 Steel ARC Frame Mount Climber 2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM419 Wehrs Quick Change Pinion Mount with Seal Plate MSRP: Was: Now: $159.95 Add to Cart Compare Bryke Racing sku: 301-764 3/4 Steel Swedge Tube Kit 4 MSRP: Was: Now: $159.95 Choose Options Compare Bryke Racing sku: 320-01x 3 Piece PINTO Spindles MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Bryke Racing sku: 320-01 3 Piece Metric Spindle MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Upper Control Arm 10in Centered Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x MSRP: Was: Now: $159.95 Choose Options Compare Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
sku: WEH WM407 Wehrs Panhard Mount for QuickChange MSRP: Was: Now: $160.95 Add to Cart Compare Wehrs sku: WEH WM241150 Steel ARC Frame Mount Climber 1-1/2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM24120 Steel ARC Frame Mount Climber 2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM419 Wehrs Quick Change Pinion Mount with Seal Plate MSRP: Was: Now: $159.95 Add to Cart Compare Bryke Racing sku: 301-764 3/4 Steel Swedge Tube Kit 4 MSRP: Was: Now: $159.95 Choose Options Compare Bryke Racing sku: 320-01x 3 Piece PINTO Spindles MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Bryke Racing sku: 320-01 3 Piece Metric Spindle MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Upper Control Arm 10in Centered Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x MSRP: Was: Now: $159.95 Choose Options Compare Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Wehrs sku: WEH WM241150 Steel ARC Frame Mount Climber 1-1/2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM24120 Steel ARC Frame Mount Climber 2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM419 Wehrs Quick Change Pinion Mount with Seal Plate MSRP: Was: Now: $159.95 Add to Cart Compare Bryke Racing sku: 301-764 3/4 Steel Swedge Tube Kit 4 MSRP: Was: Now: $159.95 Choose Options Compare Bryke Racing sku: 320-01x 3 Piece PINTO Spindles MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Bryke Racing sku: 320-01 3 Piece Metric Spindle MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Upper Control Arm 10in Centered Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x MSRP: Was: Now: $159.95 Choose Options Compare Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Wehrs sku: WEH WM24120 Steel ARC Frame Mount Climber 2" Tubing MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs sku: WEH WM419 Wehrs Quick Change Pinion Mount with Seal Plate MSRP: Was: Now: $159.95 Add to Cart Compare Bryke Racing sku: 301-764 3/4 Steel Swedge Tube Kit 4 MSRP: Was: Now: $159.95 Choose Options Compare Bryke Racing sku: 320-01x 3 Piece PINTO Spindles MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Bryke Racing sku: 320-01 3 Piece Metric Spindle MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Upper Control Arm 10in Centered Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x MSRP: Was: Now: $159.95 Choose Options Compare Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Wehrs sku: WEH WM419 Wehrs Quick Change Pinion Mount with Seal Plate MSRP: Was: Now: $159.95 Add to Cart Compare Bryke Racing sku: 301-764 3/4 Steel Swedge Tube Kit 4 MSRP: Was: Now: $159.95 Choose Options Compare Bryke Racing sku: 320-01x 3 Piece PINTO Spindles MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Bryke Racing sku: 320-01 3 Piece Metric Spindle MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Upper Control Arm 10in Centered Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x MSRP: Was: Now: $159.95 Choose Options Compare Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Bryke Racing sku: 301-764 3/4 Steel Swedge Tube Kit 4 MSRP: Was: Now: $159.95 Choose Options Compare Bryke Racing sku: 320-01x 3 Piece PINTO Spindles MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Bryke Racing sku: 320-01 3 Piece Metric Spindle MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Upper Control Arm 10in Centered Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x MSRP: Was: Now: $159.95 Choose Options Compare Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Bryke Racing sku: 320-01x 3 Piece PINTO Spindles MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare
Bryke Racing sku: 320-01 3 Piece Metric Spindle MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare
Upper Control Arm 10in Centered Upper Control Arm 10in Centered 10" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 9.75" to 10.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 107-x MSRP: Was: Now: $159.95 Choose Options Compare Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Upper Control Arm 11in Centered Upper Control Arm 11in Centered 11" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 10.75" to 11.75" Comes Complete With" Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 108-x MSRP: Was: Now: $159.95 Compare Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Upper Control Arm 8in Centered Upper Control Arm 8in Centered 8" Adjustable Upper A-FRAME With Small Diameter Standard Length Pin Adjusts From 7.75" to 8.75" Comes Complete With: Rod Ends Adjusters Jam Nuts Cap Ball Joint Pin Bryke Racing Part #: CRS 106-x MSRP: Was: Now: $159.95 Choose Options Compare Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket w/ Mult Hole Clamp on Trailing Arm Bracket Lower Clamp-On 3" OD Axle Tubes Material: Steel Finish: Natural Pair Bryke Racing Part #: PEM HMBLMULTIB-ON MSRP: Was: Now: $159.95 Add to Cart Compare Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Chevelle RH Lower Control Arm Kit 2 Press in Ball Joint Passenger Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Compare Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Chevelle LH Lower Control Arm Kit#2 Press in Ball Joint Driver Side Chevelle Stock Lower Control Arm Kit Steel bushings are installed and spot welded Reinforced front section to help keep control arm from bending Shock mount is included but will need to be installed by you Part# 303-301 The lower... MSRP: Was: Now: $164.95 Add to Cart Compare Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Wehrs Panhard Mount for QuickChange Wehrs Panhard Bar Mount for QuickChange QuickChange Pinion Mount Double Adjustable Bolt On Bryke Racing Part #: WEH WM407 MSRP: Was: Now: $160.95 Add to Cart Compare Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Steel ARC Frame Mount Climber 1-1/2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 1.5" Square Tubing Bryke Racing Part #: WEH WM241150 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Steel ARC Frame Mount Climber 2" Tubing Wehrs Panhard Bar Bracket Steel Frame Mount Clamp-On Centered Adjustable Fits 2" Square Tubing Bryke Racing Part #: WEH WM24120 MSRP: $150.99 Was: Now: $149.95 Add to Cart Compare Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected × OK
Wehrs Quick Change Pinion Mount with Seal Plate Wehrs Quick Change Pinion Mount with Seal Plate Steel Bolt On Double Adjustable Climber Gear, Hardware, and Seal Included Bryke Racing Part #: WEH WM419 MSRP: Was: Now: $159.95 Add to Cart Compare 3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected
3/4 Steel Swedge Tube Kit 4 Four Link / Two Link Bar Includes (4) 3/4" Swedge Tubes Your Choice of Length (8) 3/4" Heims (8) 3/4" Jam Nuts Perfect for any suspension piece on a modified 3/4" Tube Length: Average Min. length with Rod Ends Average Max. Length with Rod... MSRP: Was: Now: $159.95 Choose Options Compare 3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare 3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare Compare Selected
3 Piece PINTO Spindles 3 Piece Pinto Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Replacement for Pinto/Mustang II setups 8 degree Pin inclination for improved handling, better driver feel, and adding cross weight when counter steering... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare
3 Piece Metric Spindle 3 Piece Metric Spindle Used with 1979 and up GM Metric front brake rotors, bearings, and calipers. Forged, Heat-treated steel OEM geometry Direct replacement for factor spindle Steering arm is tapered to accept Metric GM style tie rods Approved for... MSRP: Was: Now: $149.95 - $289.95 Choose Options Compare
