Building Components

Tubing Reducer 1.50 to 1.25 x 4in long Pair

Tubing Reducer Size: 1.50" to 1.25" x 4" long Pair Bryke Racing Part #: 303-125x2

Front Weight Jack Plate 1"-8 5in OD

Front Weight Jack Plate 1"-8  5in OD Front Weight Jack Plate 1"-8 threaded bushing welded to a 3/16" thick by 5" OD plate Bryke Racing Part #: 320-315

Wehrs 1in Wide x 3in Clamp Ring

Wehrs 1in Wide x 3in Clamp Ring Clamp-On Ring 2-Piece 2-Bolt Size: 3" ID 1" Wide Material: Steel Finish: Natural Bryke Racing Part#: WEH WM200-23

WELD TAB for Body Bracing Threaded 1/4-20

WELD TAB for Body Bracing Threaded 1/4-20 Weld Tab For Body Bracing Thread: Tapped 1/4"-20 Bryke Racing Part #:WEH WM322

Clamp On Lower Link Mount

Clamp-on Lower Link Mount Mounts Shock, slider and Trailing arms to one single mount 6 inches from center of shock mount to center of axle tube 1/2" holes on the front and back 3/4" Hole for link Great choice for converting 4 links to B-mods and souther...

Clamp On Coil Over Bracket

Clamp-on Coil Over Bracket Fits 3" Axle Tube 7" From Center of Mount Hole to Center of Axle tube Hole Bryke Racing Part #: 330-010

Spring Seat

Spring Perch Seat Welds to 3" rear end housing Works with 5" springs Overall length: 7" Height: 3-1/2" Bryke Racing Part# 320-335

Jack Bolt Collar 1-1/8"

Jack Bolt Collar 1-1/8" Thread Steel Bryke Racing Part #: 320-323

Trick Tab

Trick Tab 1/8" Thick 3/8" Hole Conforms to round tubing for increased strength and easier welding Package of 10 Bryke Racing Part #: 303-107

Trick Tab 1/4" Hole 10 Pack

Trick Tab 1/8" Thick 1/4" Hole Conforms to round tubing for increased strength and easier welding Package of 10 Bryke Racing Part #: 303-106

Trick Tab Slotted

Slotted Body Tabs 1-3/4" x 1-1/2" x .130" Thick Slot 1/4" x 3/4" Steel 10 Pack Bryke Racing Part# 303-109-10

Body Tab

Body Tab Steel 0.085" thick 1/4" Hole 1-1/2" Tall Conforms to round tubing for increased strength and easier welding Package of 10

Radius Body Tabs

Body Tabs with radius Fits 1 1/2" Tubing, can be fitted for additional tubing sizes 5/8" From Center of Hole to Middle of Radius 1/4" Hole 1-3/8" Wide x 1-1/2" Tall .130" thick Flat 10 Pack Bryke Racing Part# 303-113-10

Chassis Radius Tabs 10 Pack

Chassis Trick Tabs 10 Pack Fits 1 1/2" Tubing 1-3/4" Wide 1-5/16" From center of hole to bottom of part 1/2" Hole Flat 10 Pack Bryke Racing Part #: 303-114

Flat Body Tabs

Flat Body Tabs 3/16" Hole 1-1/2" Long 1-1/2" Wide 15/16" From Center of hole to bottom of tab 10 Pack Bryke Racing Part #: 303-117

Roll Cage Slugs

Roll Cage Slugs Roll Cage Slug Frame Support Choice of 1-1/4", 1-1/2" or 1-3/4" Diameter 1/8" Thick Use for end caps for roll cages, bumpers, round tubing Package of 10 or 20

Seat Belt Tabs

Seat Belt Tabs Use for mounting Seat Belts, Seats, Shocks, Chassis Parts, Etc. Dimensions - 1-1/2" Tall, 1" Wide - 2-1/4" Wide, 1/2" diameter hole Available in 3/16" & 1/4" thicknesses

Double Shear Seat Belt Tabs

Seat Belt Tab Double Shear for added strength 1/8" Steel 1/4" Gap 1/2" Holes 1 5/16" from bottom to center of holes 2 1/8" over all length Bryke Racing Part #: 303-200

Gussets

Steel Gussets Gives additional support Dimensions - 1-3/4" X 1-3/4" 1/2" Hole Bryke Racing 303-104

Large Roll Cage Gusset

Lg. Gusset Roll Cage Gusset Dimensions: 3-1/2" x 2-3/4" x 4-1/8" Thickness: 1/8"

Saddle Wrap Around Gusset 5 Pack

Saddle Wrap Around Gusset Gusset Fits Tubing 1.50" - 1.75" Can be used to join tubing from 70 degrees to 110 degrees 1/16" Thick Provides more support and rigidity than a standard flat gusset Pack of 5 Bryke Racing Part#: 303-120X5

Weld On Nuts

Weld On Nuts Steel Sold Individually 1/4"-20 .625"Big OD .370 Small OD Overall Length: .500" Part# 303-350 3/8"-16 Big OD: 1" Small OD: .750" Overall Length: .625" Part# 303-355 3/8"-16 Long Big OD: 1" Small OD: .750" Overall Length: 1.125"...

Bolt On Shock Mount

Bolt-On Shock Mount Clamps to 1-1/2" tubing Your choice of 1", 2", or 3", from edge of tubing to center of shock bolt Steel Includes bolts and shock spacer Bryke Racing Part# 303-31x

Shock Mount Wide

Shock Mount - Wide Measures 1-3/4" OD Wide (1-1/2" ID) X 2" Long Flat Bottom Includes Bolt, Nut, & Spacer Bryke Racing Part# 303-300    

Shock Mount Narrow

Shock Mount - Narrow Measures 1-1/4" OD Wide (1" ID) X 2" Long Concave Bottom Includes Bolt, Nut, & Spacer Bryke Racing Part# 303-301    

1" Weld on Notched Shock Mount

1"” Weld on Notched Shock Mount Overall length 2" Concave to center bolt 1" Inside to inside width 1-1/2" Outside to outside width 1-3/4" Steel Shock Mounting Brackets Includes Nuts and Bolts Bryke Part# 303-302

2" Weld on Notched Shock Mount

2"” Weld on Notched Shock Mount Overall length 3" Concave to center bolt 2" Inside to inside width 1-3/4" Outside to outside width 2" Steel Shock Mounting Brackets Includes Nuts and Bolts Bryke Part# 303-303

3" Weld on Notched Shock Mount

3” Weld on Notched Shock Mount Overall length 4" Concave to center of bolt 3" Width inside to inside 1-3/4 Width outside to outside 2" Steel Shock Mounting Brackets Includes Nuts and Bolts Bryke Part# 303-304

4" Weld-On Notched Shock Mount

4” Weld on Notched Shock Mount Overall length 5" Concave to center bolt 4" Inside to inside width 1-3/4" Outside to outside width 2" Steel Shock Mounting Brackets Includes Nuts and Bolts Bryke Part# 303-305

Shock Mount 2 hole

Shock Bracket 2 Hole Overall Length 3-1/4" Length from inside of radius to end 2-3/4" Outside to Outside width 2" Center to center between bolt holes 1" Edge to center of 1st bolt hole 1/2" Includes Bolt, Nut, & Spacer Bryke Racing Part# 303-315

Shock Mount 3 Hole

Shock Bracket 3 Hole Overall Length 5-3/4" Length from inside of radius to end 5-1/4" Outside to Outside width 2" Center to center between bolt holes 1" Edge to center of 1st bolt hole 1/2" Includes Bolt, Nut, & Spacer Bryke Racing Part# 303-316

Fuel Cell Mount-2"

Fuel Cell Mount Channeled .085 Thick 1-3/4" Wide 3/8" Hole 2" Long

Battery Box Weld on

Universal, lightweight steel battery box. May be welded or bolted to your frame. Dimensions: Length: 10-3/4" Depth: 6-7/8" Easy installation. Includes hold-down hardware Raw Steel

3" Fuel Cell Mount

Fuel Cell Mount Channeled .085 Thick 1-3/4" Wide 3/8" Holes 3" Long

Fuel Cell Mount-4 3/4"

Fuel Cell Mount Channeled .085 Thick 1-3/4" Wide 3/8" Holes 4-3/4" Long

Bolt-On Battery Box

Universal, lightweight steel battery box. May be welded or easily bolted to your frame. Dimensions:Easy installation. Length: 10-3/4" Depth: 6-7/8" Includes hold-down hardware Raw Steel

Hood Pin Boss

Hood Pin Boss 1/2"-20